Snowman Wreaths Craft And Embroidery Hoop Snowman DIY

Do you wanna build a snowman? I do!

I never thought I’d be this into making wreaths, but after last week’s success, I knew exactly which product I wanted to tackle next: the snowman wreath. I admit, I was afraid of tackling this craft. All the other snowmen wreaths that I saw had turned out so professionally that I wondered if I could make a wreath of that quality (I’m pretty new to making wreaths, so yeah, I was intimidated). At the end of the day though, I can’t believe how easy it was! I got so excited that I made two snowman wreaths using grapevine wreaths–one painted white and one natural.

A few weeks ago, though, I actually made another snowman decoration that could be a wreath if you wanted it to be: the embroidery hoop snowman (pictured above with the others). Be sure to stick around to the end of the post for full details on that one!

But first, let’s get into the super easy yet professional scale grapevine wreath snowmen.

For your convenience, this post contains affiliate links to products used in this craft from Amazon.com. Purchasing products from these links does not cost you any extra money, but it does direct a small portion of the profits to me. For more information about my affiliate status, see the right sidebar.

Snowman #1: White Snowman With Hat and Bow

Materials:
2 Grapevine Wreaths (This pair was 10 inches and 14 inches)
White Spray Paint
Wire Or String
Plastic Hat
Christmas Ribbon Bow or Scarf

Tools:
Scissors
Hot Glue Gun

1. Spray your grapevine wreaths white.

2. Attach your wreaths to one another by using either wire or string.

For reference, here’s how I wrapped my wire around the two wreaths. You can see that it’s the back since I already have the bow on the front.

3. Cut your plastic hat in half so that it’ll lay flat against the door or wall.

Here’s the hat cut in half, one showing you the interior and one showing the exterior.

4. Attach your large bow or scarf to the snowman’s neck area using either wire, string for the base. Then, use hot glue if you want the ribbon pieces to stay in a particular way. Feel free to cut off any excess ribbon to put on the hat to make it look like a matching set.

5. Before you attach your hat to the snowman’s head, loop wire or string off the head so you have something to hang the snowman from.

6. Attach the snowman’s hat to the head using your hot glue gun or gorilla glue.

Here’s what the loop looks like behind the hat. You can’t see it at all when it’s hanging.

7. Hang your finished product and enjoy its beauty!

Snowman #2: Natural Snowman With Lights

Materials:
2 Grapevine Wreaths (This pair was 14 inch and 18 inch).
Wire Or String
Christmas Ribbon Bow or Scarf
Christmas Lights (Plug in lights or battery powered lights)

Tools:
Scissors
Hot Glue Gun

  1. Attach your wreaths to one another by using either wire or string. For reference, see the picture above with the white wreaths
    .
  2. Tie your scarf around your snowman’s neck area. Secure with hot glue at several spots, but don’t glue the entire thing down.
  3. If you are using plug-in lights, stick the end that does not go into the wall (sometimes called the “female end”) of your plug into the back of the snowman’s scarf. If you’re using a battery pack strand of Christmas lights, stick the battery pack in that same spot.

The plug before it’s tugged in.
The plug tucked in.

4. Wrap your lights around the snowman’s head. Once you reach the scarf area, loop your lights around the back behind the scarf and then continue looping the lights around the body of the snowman.

5. Again, if you’re using plug-in lights, allow the excess light to go down towards your power source.

6. If applicable, add a ribbon to the top of the snowman to hang it from. You can also add a hat like the last one if you want, but I preferred mine without one.

7. Hang it up and enjoy! 🙂

I’m truly thrilled with how both of my snowmen turned out. Even more than that, I’m thrilled that I didn’t let my fear keep me from trying a project that intimidated me. I hope that as we get further into 2020, you’ll tackle crafts that intimidate you too. After all, if you never try, then you fail by default.

At the start of the post, I did promise I’d tell you a little bit more about my embroidery hoop snowmen. These fellas are absolutely precious. I made a bunch in different sizes, and when I grouped them together, my mom commented on how it looked like a snowman family. Now I can’t unsee it!

If you want to tackle this craft, here’s what you need:

Materials:
2 Embroidery Hoops
Lace Fabric (I used an old table cloth)
Black and orange buttons
Christmas ribbon or fabric

Tools:
Hot Glue Gun
Scissors

1. Choose 2 embroidery hoops that look like a head and body when placed atop one another. Take them apart and paint the completed circles (the ones that don’t split) white.

2. Cut your lace to size and glue to your embroidery hoops.

This is the glued side (the back of the snowman)

3.Turn over the embroidery hoops so the glued side isn’t visible. Glue buttons to snowman’s head like a face. I recommend making the eyes larger buttons compared to the mouth buttons.

4. Attach a ribbon or fabric around the neck area to look like a scarf.

5. Once it’s all dry, loop it on a nail and hang it.

Of course, you can also add a hat if you want to, but I found the solid black contrasted the delicate lace too much on mine. However, it’s your snowman, so do what you want!

I hope you enjoyed today’s three tutorials on making awesome snowman decor. If you liked it, be sure to share it on pinterest and follow my pinterest for more inspiration. Click here if you’re interested in joining my email list, where you get exclusive resources and downloads delivered to your inbox!

Happy DIYing!

Steph

3 thoughts on “Snowman Wreaths Craft And Embroidery Hoop Snowman DIY

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s